Page 15 of 29
Rogue Outcast 1 Beam User Manual Rev. 1
O
PERATION
Setup
(continuation)
Lamp Settings
On/Off
ON
Turns lamp on/off
OFF
State/Power
On
ON
Defines the status of lamp when powering up
product
OFF
Off via DMX
YES
Turns off the unit via DMX controller
NO
On if DMX On
YES
Turns lamp on when DMX signal is detected
NO
Off if DMX Off
YES
Turns lamp off when DMX signal is lost
NO
Ignition Delay
0–255
Selects duration of delay between product
power on and lamp power on
Low Power
Delay
0–255
Selects the duration of delay when shutter is
closed and lamp enters lower power state
Reset Lamp
Time
YES
Resets lamp timer to 0
NO
Leaves lamp time unchanged
Maintenance
Timer
Interval
10–250
Defines amount of hours between
maintenance
Remain Time
NO
Resets amount of time remaining in
maintenance cycle
RESET
Reset Function
Pan/Tilt
YES/NO
Reset individual functions or all functions
from start-up
Shutter/Prism
Color
Gobo
Frost/Focus
All
Factory Settings
YES
Reverts the product back to the original
factory settings
NO
Sys Info
Disp Ver
V_
Shows the software version
Running Mode
_ _ _
Shows current running mode
DMX Address
_ _ _
Shows current DMX address
Temperature
_ _ C
Shows the product’s temperature in °C
Lamp On Time
_ _ _ _
Shows the amount of time the lamp has been
on (provided the counter has been reset
upon installation of new lamp)
Remaining Time
_ _ _ _
Shows the amount of time remaining in
maintenance cycle
UID
_ _ _ _ _ _ _ _ _ _ _ _
Shows product UID
Main Level
Programming Levels
Description