Page 14 of 20
EZpar™ 56 User Manual
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode (Static,
Automatic, or Sound-Active) to a DMX string connected to a DMX controller.
Products in standalone mode may transmit DMX signals that could interfere with
the DMX signals from the controller.
Sound-Active
Mode
To enable the Sound-Active mode, do the following:
1. Press
<MENU>
repeatedly until
P--
shows on the display.
2. Press
<ENTER>
and
P 1
–
P 6
shows on the display.
3. Use
<UP>
or
<DOWN>
to select
P 5
(3-color Sound-Active program) or
P 6
(7-color Sound-Active program).
Note:
P 1
–
P 4
are auto programs (see below).
4. Press
<ENTER>
.
Sound Sensitivity
To set the sound sensitivity, follow the instructions below:
1. Press
<MENU>
repeatedly until
SenS
shows on the display.
2. Use
<UP>
or
<DOWN>
to select the desired sound sensitivity (
u 0
–
u100
).
3. Press
<ENTER>
.
The product will only respond to low frequencies of music (bass and drums).
Automatic Mode
To select an auto program, do the following:
1. Press
<MENU>
repeatedly until
P--
shows on the display.
2. Press
<ENTER>
and
P 1
–
P 6
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the desired auto program:
•
P 1
- 3-color snap
•
P 2
- 3-color fade
•
P 3
- 7-color snap
•
P 4
- 7-color fade
Note: P 5
and
P 6
are Sound-Active programs (see above).
4. Press
<ENTER>
.
Program Speed
To set the auto program speed, follow the instructions below:
1. Press
<MENU>
repeatedly until
S--
shows on the display.
2. Use
<UP>
or
<DOWN>
to select the desired auto program speed
S 1
–
S100
(slow to fast).
Note:
This speed setting is for auto programs
P 1
–
P 4
only
.
3. Press
<ENTER>
.
