Page 12 of 20
EZpar™ 56 User Manual
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX Personality
and Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The EZpar™ 56 uses up to 7 DMX channels in its 7-channel DMX mode, which defines
the highest configurable address to
506
.
If unfamiliar with DMX, download the DMX Primer from
To select the DMX personality and starting address, do the following:
1. Press
<MENU>
repeatedly until
3-CH
(3-channel mode) or
7-CH
(7-channel mode)
shows on the display.
2. Press
<ENTER>
and
d 1
—
d512
shows on the display.
3. Use
<UP>
or
<DOWN>
to select the starting address.
4. Press
<ENTER>
.
