3
EN
QUICK REFERENCE GUIDE
D-Fi XLR Pack QRG Rev. 2
Operation
To set the D-Fi channel on the D-Fi XLR TX or the D-Fi XLR RX:
1.
Set the power switch to the
ON
position.
2.
Press the
<MENU>
button repeatedly to cycle through channels 1–16 (see diagram below).
LED Indicator Diagram
Battery Power
Each D-Fi XLR product comes with a rechargeable lithium-ion battery for cable-free operation.
Battery Charge Notes
•
Avoid depleting the battery below 10%.
•
For best results, charge the battery in a temperature between 32 °F (0 °C), and 95 °F (35 °C).
•
When charging the battery, keep the product at least 1 m from any open flame or hot plate.
•
If the battery is completely discharged, the device cannot be turned on immediately when the charger is
connected. Allow a depleted battery to charge for a few minutes before turning on the device.
•
While charging, the device may heat up. This is normal and should not affect the device’s lifespan or performance.
If the battery gets hotter than usual, the charger may stop charging.
•
Do not charge the batteries in a closed container.
•
Do not charge the battery for more than 24 hours.
Battery Run Time
The power indicator on the D-Fi XLR RX and the D-FI XLR TX shows red when the battery is charging,
and green when it is fully charged.
Do not charge the batteries in a closed container.
Product
Maximum Run Time
Recharge Time
D-Fi XLR TX
Up to 11 hours
4 hours
D-Fi XLR RX
Up to 10 hours
2.5 hours
Signal
Power
Channel
Channel Key
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Summary of Contents for 10111787
Page 1: ...Quick Reference Guide ...
