Chattanooga Revolution Wireless User Manual Download Page 66

Page: 66 / 88

7 . t r O u B l e S H O O t i N G

REVOLUTION WIRELESS™

7.2 Behavior of the Module leds

Problem

Possible cause

Solution

The LED blinks alternately green
and red

The module is out of range or is
not recognized by the Remote
Control.

A. Check the remote control is

properly turned on.

B. Check that the module and

the remote control are less
than 6.5 feet away.

C. Try restarting the module.
D. Place the module and the

remote control on the same
docking station in order to
pair them.

The LED is constantly red

Module battery level low

A. Check the module is charged.
B. Try restarting the module.
C. If despite this the LED is still

red, contact the customer
services that have been
stipulated and approved by
the manufacturer.

Summary of Contents for Revolution Wireless

























































































Search results

Summary of Contents for Revolution Wireless

Reviews:

Related manuals for Revolution Wireless

Brands by name

Popular brands

Chattanooga Revolution Wireless, User Manual

Search results

Summary of Contents for Revolution Wireless

Reviews:

Related manuals for Revolution Wireless

Brands by name

Popular brands