21
POWERING UP THE DEVICE
Insert the power cord into the back of the device,
insert the plug into a power outlet. Switch device on
with switch on the back of the device.
Make sure the mains connector remain accessible at
all times as it can serve as an emergency switch. Turn
off the main rocker switch to completely switch off
the device. For an all-pole separation from the mains
supply, disconnect the mains plug from the socket.
1. The Initialisation screen below will be shown for a
few seconds whilst the device starts.
2. The first setup screen will be displayed after this
allowing the user to set language and time in the
device.
3. If after this step you see the screen below, switch of
the device and follow instructions in point 4 below. If
you do not see this screen the device is ready to use.
4. Insert the supplied USB drive into USB port of device.
5. Switch on the Intelect
®
RPW 2 device. The device will
automatically detect software upgrade and install.
6. Home screen will be displayed when SW update is
finished.
Important: DO NOT interrupt the process. Do not
connect any other USB device or connection other than
the USB key provided by DJO. Electrical dysfunction and
device damage could happen.
Summary of Contents for Intellect RPW 2
Page 1: ...EN Quick Start Guide ...
