Intelect® Transport 2-Channel Electrotherapy
33
OPERATION
The Operator Interface consists of buttons with a liquid crystal display (LCD). The operator is able to view parameter options on the display
and make selections by pressing the buttons on the control panel. The LCD will provide continuous information during the treatments
concerning power and elapsed time. Parameters are adjusted using control panel buttons on the front of the unit. The output can be
stopped by pressing the “PAUSE” or “STOP” buttons located on the control panel.
To apply electrotherapy, do the following:
1.
Turn system power “ON” by pressing the Power On/Off button.
The message "Initializing System" displays. The unit will go through self diagnostics,
and the home screen displays on the LCD.
2.
Connect the Lead Wires to the appropriate electrodes.
To see a list of recommended electrodes and their preparation, see
pages 29-32
.
NOTE:
Do not use unnecessary force to connect the electrodes to the lead wires.
3.
Place the self adhesive electrodes on the sites prescribed by a qualified practitioner.
Make sure you press them firmly on the patient’s skin to ensure good conductivity.
STARTING, STOPPING, AND INTERRUPTING THERAPY
Do not turn the unit on or off while it is connected to the patient.
