22
Intelect
®
Advanced Laser Module
SETUP
To attach the module to the unit, do the following:
1.
Disconnect the unit from the power source.
2.
Remove the rear access panel and disconnect the power cord from the main unit.
3.
Place the main unit on a level surface.
4.
Remove the front access panel and disconnect all cables and wires.
ATTACHING THE MODULE TO THE UNIT
WARNING
Disconnect the unit from the power source (electrical
outlet or battery module) before attempting any
maintenance, removal, or replacement procedures
to prevent possible electrical shock and equipment
damage. However, if you are disconnecting another
module (e.g., battery), make certain you leave the
ribbon cable plugged into the main unit.