36
Vectra Genisys® Laser Module
OPERATION
STARTING, STOPPING, AND INTERRUPTING LASER LIGHT THERAPY CONTINUED
18.
Press the START button. A message displays to alert you to the fact that the laser is armed.
The unit will beep two times to count down the number of seconds left until the
applicator is ready. After the countdown, press the Pause/Resume button to begin the
treatment.
After you press the Pause/Resume button, an orange light will illuminate on the back of
the laser applicator to indicate that laser output is being distributed.
NOTE:
When treatment time has expired, a tone will sound.
The therapy can be interrupted at any time by pressing the Pause/Resume button on the
back of the applicator, the STOP button (on the Operator Interface), or the PAUSE button
(on the Operator Interface).
When the STOP button is pressed, the applicator stops emitting laser light energy, and the
Completed Treatment Review window displays. Press the button next to Start New
Treatment to begin a new therapy session (refer to
), or press Save to
Patient Card to transmit the parameters of the treatment to the patient card. For more
information on the Save to Patient Card option, see the unit’s user manual.
