OPTIFLEX S USER MANUAL
2
PRECAUTIONARY INSTRUCTIONS
WARNING
– The following precautions should be taken in order
to reduce the risk of fire, electrical shock, injury to persons or
damage to the OptiFlex
®
S:
• Read this manual before assembling or using OptiFlex S.
• Only use OptiFlex S on solid, flat surfaces.
• Extreme caution should be taken when in use around children.
• Use OptiFlex S only as described in this manual.
• Keep hair, loose clothing, fingers and all parts of body away from
moving parts of OptiFlex S.
• DO NOT use OptiFlex S outdoors or on wet surfaces.
• Materials may become flammable or combustible if exposed to a
source of ignition.
• Disconnect electrical supply before servicing or cleaning. Failure to
do so could result in electrical shock or personal injury.
• DO NOT use OptiFlex S while smoking or around open flame.
• Exercise caution when using accessories and auxiliary devices such
as muscle stimulators, ColPaCs and other modalities.
• Turn power off before unplugging.
• Unplug the power supply by grasping the plug not the cord.
• Damage may occur to OptiFlex S if not transported and stored
between 0 and 140°F (-18 to 60°C).
• Unplug from power supply when not in use.
• DO NOT use if cord or plug is damaged.
• Use extra care when touching metal of OptiFlex S after exposure to
cold or heat.
• DO NOT handle any electrical apparatus with wet hands.
• DO NOT use OptiFlex S as a toy.
• Condensation could result and damage OptiFlex S if unit is subjected
to periods of low temperatures followed by periods of high
temperatures.
• DO NOT use on unstable surfaces.
• Precautionary measures should be taken when any type of liquid
comes in contact with an electrical apparatus.
• OptiFlex S is made from high impact materials. However, structural
failure or hidden damage can be caused by shock, impact or dropping
the unit. Use care when transporting and storing unit to avoid
equipment damage.
• To isolate the unit from the power source, disconnect the power cord
at the wall outlet.
• OptiFlex S should only be used after the operator has thoroughly
read and understands this manual.
• Rapid increases in ROM can cause complications.
• OptiFlex S is not to be used in the presence of flammable anesthetic
mixture with air or with oxygen or nitrous oxide.
• Meets IEC/EN 60601-1-2 Electromagnetic Compatibility/interference
safety standard. (Care must be taken when operating this equipment
around other equipment. Potential electromagnetic or other
interference could occur to this or to the other equipment. Try to
minimize this interference by not using other equipment in
conjunction with it.)
