OPTIFLEX S USER MANUAL
16
Warm-up Program
The OptiFlex
®
S has a warm-up mode as a special function. After the warm-up mode
is activated, the OptiFlex S begins the movement in the center between the
programmed values for abduction/adduction, elevation or internal/external rotation.
The extent of movement is increased by 3° in each direction for every motion cycle
until the set values are reached. The device then moves between the programmed
values.
After the therapy time has elapsed and the device is started again, treatment begins
with the warm-up mode unless it is deactivated.
Asynchronous
Motors A and B can be operated synchronously or asynchronously.
In synchronous use, Motors A and B execute a synchronous motion in terms of
adduction-internal rotation and abduction-external rotation.
In asynchronous use, the two motors operate independently in the relevant range of
motion. This mode requires particular care and attention on the part of the operator
to ensure that the OptiFlex S is used without any risks to the patient.
CAUTION!
It is generally recommended that the OptiFlex
®
S be
operated synchronously. The use of asynchronous operating
mode must be medically or therapeutically indicated.
OPTIFLEX S USER MANUAL
