Chattanooga Group FLUIDC DHT 1480, Service Manual

Page: 9 / 49

Fluido DHT ™ Dry Heat Therapy Unit
7
NOMENCLATURE
Fluido Control Panel
The Control Panel nomenclature graphics below, Figure
3.2, indicate the location and functions of the Fluido DHT
Model 1480 and 1481 control panel.
Know the components and their functions before performing
any operation of or service to the Fluido DHT Model 1480
and 1481 unit.
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
1 10 0
1 11 1
1 12 2
1. PANEL DISPLAY- Displays settings and operational
parameters.
2. TEMPERATURE- Use in conjunction with the Up and
Down arrows to set operation Temperature.
Temperature can be adjusted in 1° increments. The
available temperature range is 88° F to 130° F
(31° C to 54° C).
3. AIR SPEED- Use in conjunction with the Up and Down
arrows to adjust air speed for fluidization of the Cellex
®
Medium. Available speeds range from 5% to 100% (in
5% increments).
4. PULSE MODE- Turn Pulse Mode On and Off as well as
adjust pulse time. Available Pulse Time is from 1
second On/1 Second Off to 6 Seconds On/6 Seconds
Off.
5. UP and DOWN ARROWS- Use in conjunction with
other mode or function buttons to set desired
parameters.
6. PREHEAT STANDBY- Turn the Preheat Standby Mode
On and Off as well as set the parameters desired for
the Preheat Standby Mode to automatically start.
7. TREATMENT STOP- Press to stop treatment.
8. TREATMENT START- Press to start treatment.
9. CLEAR BUTTON- Used to turn off maintenance
indicators after maintenance has been properly
performed.
10. MEDIA- Indicator will light when it is time to change the
Cellex
®
Medium.
11. FILTER- Indicator will light when it is time to change the
required filters.
12. TIME- Use in conjunction with the Up and Down arrow
buttons to set treatment time. Available time is 1 to 99
minutes, in one minute increments, or Continuous.