manualshive.com logo in svg

Chassis Plans CPX1-241, Technical Reference Manual, Page: 10 / 72

Share
Download
Chassis Plans CPX1-241 Technical Reference Manual Download Page 10

 Chassis Plans CPX1-241 Technical Reference 

Chapter 1 - Introduction 

 

Page 2 

Genesis Based LCD Controller 

 
The LCD Controller is a key component in any display system.  This is a long life revision controlled military 
grade component.   The controller board selected is based on the Genesis FLI30436 LCD Controller.  It 
provides: 
 

 

Faroudja® signal processing including TrueLife™ Video Enhancer 

 

Next generation 10-bit Faroudja DCDi Cinema® format conversion 

 

Dual 10 bit video decoders for up to 1.06 billion colors 

 

VBI support for Teletext, Closed Captioning V-Chip and other services 

 

Worldwide video standard support 

 Picture-in-Picture 

(PIP) 

and Picture-byPicture (PBP) 

 

Analog Video Capture up to 162 MHz (up to WUXGA 1920 x 1200 @ 60 Hz) support  

 

Digital Video Capture up to 165 MHz 

 

1-bit Advanced Color Management (ACM-3D) and Adaptive Contrast Control (ACC) 

 

Optional 3G HD-SDI adaptor for professional and broadcast video applications 

 

Text overlay via Serial Port or Ethernet 

 

Full command of all OSD functions through Serial Comm port, Ethernet or IR remote control 
 

This ruggedized military grade controller is rated for operating at -40 to +80 deg C, uses low mass tantalum 
capacitors for maximum vibration and shock tolerance and is conformal coated for extreme ruggedness.  MTBF 
for the controllers is in excess of 100K hours. 
 
The controller will provide input up/down scaling of virtually any input signal to scale the image to the 1920x1200 
native LCD panel resolution.  It provides for PC, Apple and Sun input resolutions. 
 
Supported Resolutions: 
 
720 x 400 @ 70 Hz 

Digital Separate Sync 

 

720 x 400 @ 70 Hz 

Sync on Green 

 

 

 

 

 

640 x 480 @ 60 Hz 

Digital Separate Sync 

 

640 x 480 @ 60 Hz 

Sync on Green 

640 x 480 @ 60Hz 

Composite Sync 

 

 

 

 

 

 

 

 

640 x 480 @ 72 Hz 

Digital Separate Sync 

 

640 x 480 @ 72 Hz 

Sync on Green 

640 x 480 @ 72Hz 

Composite Sync 

 

 

 

 

 

 

 

 

640 x 480 @ 75 Hz 

Digital Separate Sync 

 

640 x 480 @ 75 Hz 

Sync on Green 

640 x 480 @ 75Hz 

Composite Sync 

 

 

 

 

 

 

 

 

800 x 600 @ 56 Hz 

Digital Separate Sync 

 

800 x 600 @ 56 Hz 

Sync on Green 

800 x 600 @ 56 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

800 x 600 @ 60 Hz 

Digital Separate Sync 

 

800 x 600 @ 60 Hz 

Sync on Green 

800 x 600 @ 60 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

800 x 600 @ 72 Hz 

Digital Separate Sync 

 

800 x 600 @ 72 Hz 

Sync on Green 

800 x 600 @ 72 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

800 x 600 @ 75 Hz 

Digital Separate Sync 

 

800 x 600 @ 75 Hz 

Sync on Green 

800 x 600 @ 75 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

1024 x 768 @ 60 Hz 

Digital Separate Sync 

 

1024 x 768 @ 60 Hz 

Sync on Green 

1024 x 768 @ 60 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

1024 x 768 @ 70 Hz 

Digital Separate Sync 

 

1024 x 768 @ 70 Hz 

Sync on Green 

1024 x 768 @ 70 Hz 

Composite Sync 

 

 

 

 

 

 

 

 

1024 x 768 @ 75 Hz 

Digital Separate Sync 

 

1024 x 768 @ 75 Hz 

Sync on Green 

1024 x 768 @ 75 Hz 

Composite Sync 

 

 

 

Summary of Contents for CPX1-241









































































Reviews:

No comments