Chase Research IOLAN+, User And Administration Manual

Page: 59 / 150

53
Printing
Printing 7
There are three methods of printing from your IOLAN+: ioland,
LPD, or RCP. ioland is the recommended method, however
this will depend on your application and operating system.
1. ioland provides a pseudo TTY interface to Unix print
spoolers (not available for Windows
®
). This software
and the binaries associated with it are available from
the Chase CD provided with the unit or from any of the
Chase web sites.
2. LPD is the ‘line printer daemon’ protocol supported by
most operating systems including Windows ® and Unix
(i.e. SCO, AIX, DG/UX, HP-UX, Solaris, etc.) Check
our US FTP site (ftp.chaser.com) for an LPD spooler for
Windows
® 95/98.
3. RCP is ‘remote copy printing’ and available on Unix
systems. It requires a special interface script also found
on the Chase CD.
7.1 Using ioland
We suggest you use the Chase ioland utility on the CD
provided. The
ioland utility can be used for Unix printing
only.
Ioland is a Unix tty port redirector. For non-UNIX
applications use LPD, see Section 7.2.
Configuration
** Administrator ** PORT SETUP MENU REMOTE-ADMIN
Hardware Flow ctrl Keys
Speed [9600 ] Flow ctrl [Hardware] Hot [^]] Intr [^C]
Parity [None] Input Flow [Enabled ] Quit [^@] Kill [^U]
Bit [8] Output Flow [Enabled ] Del [^@] Sess [^@]
Stop [1 ] Echo [^@]
Break [Disabled] IP Addresses
Monitor DSR [No ] Src [ ] Mask [ ]
Monitor DCD [No ] Dst [ ]
User Options Access
Name [ ] Keepalive [No ] Access [Remote ]
Terminal type [ansi ] Rlogin/Telnet [Telnet] Authentication [None ]
TERM [ ] Debug options [No ] Mode [Telnet]
Video pages [0] Map CR to CR LF [No ] Connection [None ]
CLI/Menu [Menu] Hex data [No ] Host [ ]
Reset Term [No ] Secure [No ] Remote Port [0 ]
MOTD [No ] Local Port [10006]
Figure 25: Ioland printing - Port Setup Menu screen.