3
Accessories
A. Extraction port
E. M6 x 30mm allen bolt
B. Height adjust wheel
F. M6 x 20mm cross head screw , washer & spring washer
C. Height locking handle G. 3mm & 5mm allen key
D.
Rubber foot
H. Blade setting device
Special safety instructions
- For planing wood only.
- Never use the machine if the blade is not correctly locked in the blade housing.
- Never allow fingers or tools to get near the blade when machine is in use.
- Never try to plane across the grain.
Fitting the rubber feet (part#150)
- Place the machine on a level surface and carefully tip backwards to show the bottom of
the machine.
- Line up the rubber feet with the threaded section in each corner and push onto the
machine. Secure each foot in place using one of the M6 x 30mm allen bolts. Use the 5mm
allen key supplied to tighten (be careful not to overtighten as this may cause the casting to
crack).
-
Carefully lift the thicknesser back upright and make sure it is level and stable.
