8
Turn the cabinet base the correct
way up.
Remove all of the bolts from the 4
joining brackets.
Use 2 bolts to attach each joining
bracket to the assembled base.
Fit the base to the cabinet.
The projecting part of each joining
bracket aligns with a hole in the
main cabinet.
Use 4 bolts to fix the joining
brackets and tighten with a 10mm
spanner.
Tighten all the remaining cabinet
base bolts.
Please Note: This part of the assembly requires 2 people:
Turn the assembled cabinet upright.
Remove the protective paper from the cast iron table top and wipe clean the grease, using a
rag and some WD40 or similar de-greaser.
Fit the hand wheel to the rise and
fall control shaft and tighten the
grubscrew.
