11
ASSEMBLY AND OPERATION
Warning! For your own safety, do not connect the log splitter to the power source until the
machine is completely assembled and you read and understand the entire instruction
manual.
Warning! For your own safety, never forget to bolt the support leg to the log splitter, lift the
log splitter by the handles at both ends and place it on a 60-75cm high, stable, flat and level
work surface.
Warning! Never use the log splitter if it is not in perfect order or if it needs servicing. Before
starting work, check correct functioning of all the safety devices (ZHB, push button).
Assembl
y
1. Assemble the safety guard for valve
control handle.
a) Turn the knob into the valve control handle.
(Fig.4)
b) Align the two holes on the safety guard
into the two bolts on the end of the
machine. (Fig. 5)
c) Use two nuts, elastic washers and flat
washers to fasten the safety bolt on the
machine body. (Fig.6)
