background image

®

QUICK GUIDE

Suitable fuels for your

Charnwood:
Wood logs

Unsuitable fuels:

Petroleum coke
Liquid fuel
Household waste
Coal singles
Small nuts or coal dust
Wet or unseasoned wood
Smokeless mineral fuel

LIGHTING AND CONTROLLING THE FIRE

Add kindling and paper or 
firelighters. 

Keep air control 

fully out and door cracked 
open.

Once kindling is alight, add 
smaller logs. 

Keep air control 

fully out and close door. 

Add larger logs once fire is 
established. 

Air control can 

be reduced to minimum.

Baffle

Improves efficiency of stove by 

slowing down flue gases

Door

Keep closed when stove is in use

Door handle

Pull to open

Riddler knob

Use operating tool to riddle

Fuel retainer

Ensure fuel does not protrude 

beyond retainer

MAINTENANCE AND CLEANING

GLASS

Wipe with damp, lint free cloth. Any stubborn deposits on the glass may 
be removed with a proprietary stove glass cleaner or ceramic hob cleaner.

BAFFLE PLATE

Take down once a month and clean. Sweep sooty deposits into fire

FLUE

Have flue swept anually. Flue can be swept through stove.

SERVICING

Stove should be serviced by a professional at least once a year.

Operating tool

Summary of Contents for ARC 7



























Reviews: