Screw in and lock the push stick hanger.
Hang the push stick on it and remember that
this is one of the world’s best finger
preservers!
Fit the belt tension control handle to the
spindle protruding from the front of the lower
front face of the saw, noting that the
grubscrew in the boss should be opposite the
flat on the spindle.
Tighten the grubscrew securely.
Apply a little tension to the blade and use a
set square to position the table at right
angles to it.
Lock it in position and if necessary, adjust the
level stop screw and the pointer so that it
aligns with the zero as shown earlier.
Summary of Contents for 5060281690036
Page 13: ...Parts List A Saw Assembly ...
