http://www.charmhigh.com
Charmhigh-V1.0-2016 | Hunan Charmhigh mechanical and electrical co., LTD
27
All Rights Reserved
7.Test
Used for testing modules of SMT machine respectively, window as show below.
Figure.
7- 1
(1)
Mhead 1\2: Button down then nozzle press down, button up then nozzle up;
(2)
Vacuum 1\2: Click button to switch nozzle in suction;
(3)
Rotate 1\2: Button down then nozzle anticlockwise rotate 180º, button up then
return back;
(4)
Blow 1\2: Click button to switch nozzle in blow;
(5)
Up work light: Click to open or close up camera work light;
(6)
Down work light: Click to open or close down camera work light;
(7)
Collect film: Click to collect film one time;
(8)
Pull needle: Button down then pull needle down, button up then pull needle up;
(9)
Pull tape position: Move pull needle to specified position of tape;
(10)
Material stack position: Move nozzle to specified position of material stack;
(11)
PCB origin: Move nozzle to PCB origin;
(12)
Move: Move mount head to certain position;
(13)
Machine origin: Click then mount head return to origin;
(14)
Nozzle 1\2 to up camera: Move nozzle 1\2 to position of up camera.
(15)
To Far: Move nozzle part to right top.
