Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Owner’s manual: model 200605 outdoor patio heater
6
Assembly Instructions
General Components & Features
Familiarize yourself with all components before proceeding . Refer to page 5 for hardware and components, and page 2
for specifications .
Do NOT attempt assembly unless all components are available . If you believe a component is missing or damaged,
contact -800-762-42 for assistance .
Note:
All hardware is mounted on a cardboard pack and numbered to match their assembly step .
Additional Requirements
The following items are not included, but are necessary for the proper assembly of your heater . Do NOT attempt to
assemble without proper tools . A hex (Allen) wrench is necessary and is included in the parts bag .
() 7/6” Wrench
() 9/6” Wrench
() 7/6” Socket Wrench
() #2 Phillips Head Screwdriver
() Leak Detection Solution (Instructions on how to make solution are included in step 2)
() Precision Filled LP Gas Grill Tank with Acme Type external threaded valve connection (4-5 gallon size)
Note: You must follow all steps to properly assemble heater .
Note: Unpacking note for 200605 patio heater.
When unpacking your heater from the carton, you will find that the
engine assembly and the base have been bolted together for shipping
purposes . Remove the three nuts at the top of the base and separate
the engine from the base . Retain these nuts for use in Step 9 .
You are now ready to begin assembly of your patio heater .
Step 1 – Attach Legs to Base
Secure Legs to Base using (2) Small Bolts, (2) Small Lock Washers and
(2) Small Nuts per leg . Finger tighten only .
Do not fully tighten until Step 2 .
Attach small ‘S’ hook on Tank Restraint Chain to left leg .
