23
Adap ve Start Control
6b.34 According to room temperature and set temperature,
the heater will automa cally come on in me to heat the room
to the set temperature at the set me. For example, if your
mer is set to start at 18:00 and temperature is set to 23°C,
the fire will come on at 17:30 to ensure the room is 23°C at
18:00.
Window Open Detec on
6b.35 When the transmi er detects a rapid drop in room tem-
perature, it will be judged as a window open, the warning icon
will be displayed and the hea ng will be turned off automa -
cally.
6b.36 A er the indoor temperature has risen or a manual over-
ride of the warning (by opera ng remote control) has been
done, the fire will return to normal working state.
Set up the communica on between the remote and appliance
6b.37 The opera ons below should be carried out before pro-
gramming, when changing to a new remote or in the event the
appliance cannot be controlled by the remote:
●
Hold the reset bu on on the appliance for 3 seconds (pen
Point may needed) un l you hear 3 short beeps from the
unit, release the bu on.
●
Press the
bu on on the remote, the programming is
finished when you hear 1 long beep from the appliance.
6b.38 Rese ng the code for remote control is necessary if the
appliance operates wrongly or the remote control does not
operate correctly.
Open the back cover of the remote control.
Press the Reset bu on on remote handset.
Follow the steps 6b.37
