12
LT2505 (ISS 13)
PEBBLE LAYOUT
•
Ensure the BASE MATRIX is in position as shown located
against the rear edge of the burner outlet.
•
Ensure the LEFT SIDE PEBBLE is located into the space
between the BASE MATRIX and the left-hand side of the fire
back with the marking "LH" go against the left-hand inside
face of the fire back.
•
Ensure the RIGHT SIDE PEBBLE is located into the space
between the BASE MATRIX and the right-hand side of the fire
back with the marking "RH" go against the right-hand inside
face of the fire back.
•
Locate the LEFT HAND and RIGHT HAND FRONT PEBBLES as
shown so that they sit on the front rail and lean back against
the BASE MATRIX. Note it is most important that they are located in their correct positions. They are marked
on the rear "L" for LEFT HAND FRONT PEBBLE and "R" for RIGHT HAND FRONT PEBBLE.
•
Place a row of pebbles (numbers positioned against the rear of fire) between the base matrix and the rear of
the chairbrick as shown.
•
Slide front support over front
edge of fire as shown below.
