www.charltonandjenrick.co.uk
11
LT6863 (ISS 05)
SECTION FOUR Cleaning & Laying the fuel bed (users instructions)
Warning:-Before you clean any part of the appliance ensure that the appliance is switched off and cool.
CLEANING: BLACK PAINTED SURFACES
These surfaces should be dusted regularly and any marks removed with a soft cloth.
Abrasive or chemical cleaner should never be used.
CLEANING: GLASS PANEL
From time to time it may be necessary to clean the glass
panel.
We recommend you use a Ceramic Hob Cleaner (brands
such as HOB BRITE and VITRO CLEN have been found to be
acceptable) these are available from most leading
Supermarkets.
Remove the glass panel as follows:
Carefully lift out the in fill covers LH and RH.
Remove the top fixing cover.
Remove the three of fixing bracket located on the top and sides of the glass panel.
Carefully lift the glass panel up out off the bottom location. Lay the glass panel down on a flat working
surface on top of an old opened newspaper with
the side to be cleaned uppermost.
Follow the Instructions on the Hob Cleaner Bottle.
On stubborn stains (where the appliance has been used for
a long period without glass panel being cleaned), use a new
Brillo Pad well wetted with the Hob cleaner applied directly
to it.
Ensure all the residues of the cleaner are removed with a
damp cloth and the glass panel is completely dry before
fitting to the appliance.
Note: - If the loose shapes have not been placed correctly,
causing the gas flame to contact the glass this may result in
glass staining that cannot be removed by cleaning.
Re-assemble in reverse order ensuring a tight seal against glass assembly.
Take care not to over-tighten the glass fixing nuts as this will cause the glass to break. Glass is not covered by
warranty
Re-fit the fascia.
Summary of Contents for Infinity 780 BF
Page 30: ...30 LT6863 ISS 05 ...
Page 31: ...www charltonandjenrick co uk 31 LT6863 ISS 05 ...
Page 32: ...32 LT6863 ISS 05 ...