PPE-5095.E
Page 2 of 2
© 2012 CHARLESWATER LTD.
Unit 17. Millbrook Business Park, Sybron Way • Crowborough, East Sussex TN6 3JZ United Kingdom
Phone: 00 44 (0) 1892-665313, Fax: 00 44 (0) 1892-668838 • Internet:
Charleswater.co.uk
Calibration
The AC Outlet Analyser and Wrist Strap Tester is calibrated
to NIST traceable standards. Calibration may be performed
to ensure that the tester is operating within limits. We
recommend annual calibration of our testers.
TESTING THE WRIST STRAP TESTER
A. LOW FAIL -
Connect a 675 kilohm resistor @ 5%
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will momentarily illuminate then
turn off. This test confirms the LOW FAIL
point.
B. LOW PASS -
Connect a 825 kilohm resistor @ 5%
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated until the
resistor is removed from the Test Plate.
This test confirms the LOW PASS point.
C. HIGH PASS -
Connect a 32 megohm resistor @ 5%
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated unitl the
resistor is removed from the Test Plate.
This test confirms the HIGH PASS point.
D. HIGH FAIL -
Connect a 40 megohm resistor @ 5%
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED should not illuminate. This test
confirms the HIGH FAIL point.
Specifications
Input Voltage:
220 VAC ±15%
Current Drain:
< 10mA
Operator Resistance Limits (nominal):
750 kilohms - 35 megohms
Test Voltage, Open Circuit:
27 VDC (nominal)
Long Term Drift:
< . 1% / decade
Dimensions:
5.1 cm x 7.6 cm x 5.1 cm (Item
99142
)
6.9 cm x 11.3 cm x 5.3 cm (Item
99143
)
Operating Temperature:
0° - 40°C
Limited Warranty
Charleswater expressly warrants that for a period of one (1) year
from the date of purchase, Charleswater AC Outlet Analysers will be
free of defects in material (parts) and workmanship (labor). Within the
warranty period, the product will be tested, repaired or replaced at
Charleswater’s option, free of charge. Call Customer Service at 00 44 (0)
1892-665313 for a Return Material Authorisation (RMA) and for proper
shipping instructions and address. You should include a copy of your
original packing slip, invoice, or other proof of purchase date. Any unit
under warranty should be shipped prepaid to the Charleswater factory.
Warranty replacements will take approximately two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Charleswater or any seller be responsible or liable
for any inury, loss or damage, direct or consequential, arising out
of the use of or the inability to use the product. Before using, users
shall determine the suitability of the product for their intended use,
and users assume all risk and liability whatsoever in connection
therewith.
