Unit 17. Millbrook Business Park, Sybron Way • Crowborough, East Sussex TN6 3JZ United Kingdom
Phone: 00 44 (0) 1892-665313 • Internet:
PPE-5076.E
Page 2 of 2
© 2013 Charleswater
Operation
1. Connect the Concentric Ring Probe to a resistance
meter using the included BNC / banana jack adapter and
the meter’s test leads.
2. Place the material to be tested on an insulative surface.
3. Place the Concentric Ring Probe on top of the material
to be tested.
4. Take a resistance measurement using the resistance
meter.
Limited Warranty
Charleswater expressly warrants that for a period of one (1)
year from the date of purchase, Charleswater Concentric
Ring Probes will be free of defects in material (parts) and
workmanship (labor). Within the warranty period, the product
will be tested, repaired or replaced at Charleswater’s option,
free of charge. Call Customer Service at 00 44 (0) 1892-665313
for a Return Material Authorisation (RMA) and for proper
shipping instructions and address. You should include a copy
of your original packing slip, invoice, or other proof of purchase
date. Any unit under warranty should be shipped prepaid to
the Charleswater factory. Warranty replacements will take
approximately two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED.
The express warranty will not apply to defects or damage
due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair
products.
Limit of Liability
In no event will Charleswater or any seller be responsible or
liable for any inury, loss or damage, direct or consequential,
arising out of the use of or the inability to use the product.
Before using, users shall determine the suitability of the
product for their intended use, and users assume all risk
and liability whatsoever in connection therewith.
Figure 4. Using the Concentric Ring Probe with the
Charleswater Analogue Surface Resistance Meter
Figure 3. Using the Concentric Ring Probe with the
Charleswater Digital Surface Resistance Meter
Specifications
Weight
2.6 kg
Dimensions
7 cm diameter x 17 cm height
(with BNC / banana jack adapter)
Outer Probe Diameter 6 cm
Inner Probe Diameter 3 cm
Insulation Resistance
Between Probes
>1 x 10
12
ohms @ 500V
Probe Resistance of
Carbon Pads
<100 ohms at low test voltage
