LT-FSDC-H
1
st
Printing
Page 9 of 11
4.5
Mounting the Closure
The FSDC-H has four threaded inserts on the back for attaching mounting hardware for either aerial strand,
wall, or pole mounting (Figure 7). Hardware for attaching mounting brackets is included in the Accessory kit.
See Table 1 for a listing of all mounting kits.
4.5.1
Aerial Mounting
The FSDC-H can be mounted on an aerial strand using the mounting kit 97-FSDCAMKT, which includes two
mounting brackets.
1.
Attach the mounting brackets using the included mounting bolts on the back of the FSDC-H
(Figure 8).
2.
Loosen the screws on the brackets so that the clamps can be opened and hung over the strand.
3.
Tighten the clamps around the strand to suspend the FSDC-H (Figure 9). The clamps can
accommodate strands of 1/4” to 3/8” diameter.
4.5.2
Pole Mounting with Straps
To mount the FSDC-H on a pole with straps, order the pole mounting kit 97-FSDCPLKTA, which includes two mounting brackets and two
mounting straps.
1.
Attach the pole mounting brackets using the included mounting bolts on the back of the FSDC-H (Figure 10).
2.
Open and route the two mounting bands through the brackets and around the pole.
3.
Close and tighten the straps (Figure 11).
Figure 8
FSDC-H with Strand Mounting Brackets
Figure 9
FSDC-H Aerial Strand Mounting
Figure 11
Pole Mounted FSDC
Figure 7
Mounting Inserts for
Bracket Hardware
Figure 10
Pole Mounting Brackets
