LT93–PS1230–1
7
Charles Industries, Ltd. All rights reserved. Printed in the United States of America.
MAINTAINING THE C-POWER
There are no adjustment or maintenance requirements for the C-Power other than cleaning the outside cabinet
with a dry cloth. Periodically have all connections checked by a qualified service person, especially if the boat is
operated in heavy, pounding seas.
TROUBLESHOOTING THE C-POWER
If there is a problem with the C-Power, first check all connections and retest. If all connections are good, see if
the problem is covered in Table 5. If the problem is not covered in Table 5, or if the C-Power still malfunctions af-
ter performing the solution given, contact Charles Marine Products for technical assistance.
Table 5. Troubleshooting Suggestions
#
Problem
Solution
1.
The ammeter deflects
in a counterclockwise
direction.
Disconnect the unit immediately. Examine wiring instructions again to assure proper
connections. A movement in a counterclockwise direction or a full-scale movement
indicates excessive current. A wiring error is suspected. A voltmeter can monitor the
voltage when the C-Power is turned on.
2.
Internal red LED on.
The unit is at half-power because the ambient air is too hot. The unit may be at
half-power because the fan is not working. Full power will be restored when the
temperature returns to normal.
WARRANTY & CUSTOMER SERVICE
Warranty
CHARLES MARINE PRODUCTS warrants the C-Power
will be free from defects in materials and workmanship
which cause mechanical failure for one (1) year, as set forth in the Limited Warranty. Review this warranty care-
fully for information on what is covered by its terms. Complete and return the warranty registration card within ten
(10) days of purchase to establish proof of ownership and validate the warranty coverage. You must provide no-
tice of any alleged defect in material or workmanship within thirty (30) days of discovering the problem, and within
the warranty period. Follow the procedure outlined below to obtain warranty service.
Warranty Service and Repair
If the unit fails to operate properly after following all the instructions in the manual, or if the C-Power requires ser-
vice, take the following steps:
1.
Contact Charles Marine Products Customer Service and obtain a ”Returned Goods Authorization”
(RGA) number and a Service Center address
2.
Ship or mail the C-Power together with the RGA to the appropriate Service Center. Shipping costs to
and from the Service Center are your responsibility
3.
When service is complete, Charles Marine Products will return the C-Power to you.
Customer Service
If technical assistance or customer service is needed, contact Charles Marine Products at:
847/806-6300 (Customer Service)
847/806-6231 (FAX)
For correspondence only, mail to:
Charles Marine Products
Charles Center
5600 Apollo Drive
Rolling Meadows, IL 60008-4049
