S2B Operator’s Manual
Operate - 17
Clean Up
Unload
1.
Park vehicle with trailer on level and firm ground.
2.
Ensure trailer is correctly attached to vehicle.
3.
Lower trailer or ramps.
4.
Remove tiedowns.
5.
If present, open fuel shut-off valve.
6.
Start engine and raise digging boom, but keep it as low as possible.
7.
Slowly back unit down or ramps.
Clean Up
Make sure all tools and accessories are securely loaded on trailer.
After unloading, remove all loose debris and spray water onto trailer floor to remove dirt and mud.
Crushing weight could cause death or serious injury. Stay
away.
To help avoid injury:
•
Keep all persons away from machine and trailer.
•
Keep boom as low as possible during unloading procedure.