S2B Operator’s Manual
Operate - 15
Hitch to Tow Vehicle
Operate
Hitch to Tow Vehicle
1.
Back tow vehicle to trailer.
2.
Put manual transmission into first or reverse
gear or automatic transmission into park. Set
parking brake. Turn off ignition.
3.
Connect trailer coupler to tow vehicle hitch
and lock in place with lock pin.
4.
Connect safety chains (shown) to tow
vehicle, crossing chains under trailer tongue,
as shown.
5.
Plug trailer electrical connector into tow
vehicle connector.
6.
Use jack crank to raise jack base and stow
handle.
7.
Remove wheel blocks.
8.
Verify operation of trailer lights.
Unhitch from Tow Vehicle
1.
Stop tow vehicle and trailer on level ground.
2.
Put manual transmission into first or reverse gear or automatic transmission into park. Set parking
brake. Turn off ignition.
3.
Block trailer wheels.
4.
Unstow handle and lower jack base.
5.
Disconnect trailer electrical connector from tow vehicle connector.
6.
Disconnect safety chains from tow vehicle.
7.
Disconnect trailer coupler from tow vehicle hitch.
8.
Use jack crank to raise trailer tongue clear of tow vehicle hitch.
9.
Start tow vehicle engine, release parking brake, and drive tow vehicle away.
a32om004t.eps