5
STATUS INDICATOR OPERATION
:
Status I
ndic
at
or
L
ight
D
escrip�o
n
Flashing yellow
AC power is applied, and the ba
�
ery is not connected.
Solid yellow
The ba
�
ery is charging and is less than 80% fully charged.
Flashing green
The ba
�
ery is charging and is greater than 80% fully charged.
Solid green
The ba
�
ery charge is complete. The ba
�
ery is being maintained at a 100% charge level.
WARNING INDICATION
:
I
ndic
a
�o
n
D
escrip�o
n
/Ac�o
n
Flashing 6V or 12V light
(Model: 030-0013-07 only)
The ba
�
ery may be defec
�
ve, or the incorrect ba
�
ery voltage has been selected. If the proper
ba
�
ery voltage is selected, take the ba
�
ery to the dealer to be tested.
Flashing LiFePO4 light
(Model: 030-0013-07 only)
The charger is a
�
emp
�
ng to recover a heavily discharged lithium ba
�
ery back to a normal state.
Alterna
�
ng yellow and green
Status Indicator Light
The charger has detected a reverse polarity connec
�
on to the ba
�
ery. Ensure the
ba
�
ery is connected properly. (Model: 030-0013-03 or 030-0013-07)
The ba
�
ery may be defec
�
ve. Take the ba
�
ery to the dealer to be tested. (Model: 030-
0013-03 only)
CHARGIN
G MO
DES
:
Model 030-0013-03 is designed to charge and maintain 12V, lead-acid ba
�
eries only. Model 030-0013-07 has a mode
selector bu
�
on to select 6V or 12V lead-acid or LiFePO4 ba
�
eries. WARNING: LiFePO4 mode should be selected only
when charging LiFePO4 ba
�
eries with a built-in Ba
�
ery Management System (BMS). Always consult the ba
�
ery
manufacturer to verify the suitability of the charger before charging.
FEATURES
STATUS INDICATOR LIGHT:
Indicates status of charger and connected battery.
Mode LEDs:
Indicates selected battery voltage and chemistry.
Mode Selector:
Press button to cycle through charging modes.
12 Volt - 1.1A
Lead - Acid
BATTERY CHARGER
and MAINTAINER
