User Manual ChargeArm v.1.0
7
4.
Use
This document describes a freestanding ChargeArm with a charge box mounted to the rear of
the upright. This charge box has a holding position for the charging connector when it is not in
use. The ChargeArm can be installed in multiple ways, such as the wall mounted version, but in
general the manner of use will be the same.
1.
Release the Charge cable:
-
Depending on your installation this can be from the charge box or
from a separate connector holder mounted somewhere else.
2.
Pull out the arm:
-
Be careful that no one is standing in
between you and the ChargeArm. (See 3,
Safety of movement zone for the arm)
-
Pull the cable gently with one hand whilst
holding the cable connector in your other
hand.
