© 2021 Charge Amps AB
Installation manual for
Charge Amps
Aura Dual Pole Mount
Doc. Nr: 130129
Rev 01
Address:
Charge Amps AB
Frösundaleden 2B
SE-169 75 Solna
Sweden
Contact:
+46 (0)8 55 11 2000
[email protected]
www.chargeamps.com
Org. No. 556897-7192
Registered office: Solna
14
Step 8
Open the lid by unscrewing the four M4 screws on the front.
Depending on the installation type:
Option1:
1.
If you got two incoming power cables pull them through the pole mount.
2.
Close the lid, make sure that no cable or obstacle is in contact with the lid. If a
cable push on the lid the IP 44 protection will fail.
Option 2:
1.
If you got one incoming power cable, read the instructions and the data sheet
for the terminal block WPD 501 2X25/2X16 1XGN/3XGY/1XBL, order nr
1562140000, at Weidmuller.com.
Adjust the height of the terminal block by
sliding it on the Din Rail and connect it.
