background image

ASSEMBLY:

     Attach four SUCTION CUP FEET 

     to BASE and tighten BOLTS. 
     Connect HANDLE to BASE by inserting  

     the 6-3/8" ROD through hole at back of  

     unit. Tighten with BOLTS.
     Attach HANDLE to interior METAL                                            

     GUIDE RODS using one SCREW 

     and BOLT.
     This product includes a 3/8” 

     Cutting Plate. 

NOTE: Additional Cutting Plates: 

•  1/2” CUTTING PLATE with frame is also                                                    

available, but not included. 

•  If you are interested in purchasing the 1/2” CUTTING PLATE, contact: 

CUSTOMER SERVICE at 1-888-815-4252. 

NOTE: Changing Cutting Plates:

•  Remove the three wing nuts on front frame housing.

•  Place new blade on the unit and retighten the wing nuts.

•  Match the PUSH PLATE to the blade

IMPORTANT SAFEGUARDS

ASSEMBLY & TIPS

•  READ ALL INSTRUCTIONS.
•  Place the appliance on a firm and stable surface.
•  Ensure that the appliance is not placed close to the edge of the table, worktop, etc. where it can be 

pushed off or fall.

•  The use of attachments not recommended or sold by the manufacturer may cause injury.
•  Never use abrasive cleaning agents or abrasive cloths when cleaning the unit.
•  Only use the unit when completely assembled.
•  DO NOT leave the appliance unattended.
•  DO NOT operate cutting with mis-matched blade and push plates.
•  Before and after each use, wash and rinse the unit with hot soapy water. Dry thoroughly with dish 

towel. 

•  DO NOT put unit in dishwasher.

The blades are very sharp. KEEP OUT OF REACH OF CHILDREN. 

NEVER LEAVE CHILDREN UNATTENDED AROUND UNIT. 

WARNING

PLEASE DO NOT RETURN THIS ITEM

TO PLACE OF PURCHASE

If you are missing parts, have 

ANY

 issues when operating this product, 

need replacement parts or need assistance please contact:

CUSTOMER SERVICE

1-888-815-4252

(8AM - 5PM CST)

NOTE:

 Please read and understand the enclosed Care and Use Guide 

We want you to be safe and we want this to be fun. 

1

2

3

USE:
TIP   : 

Cut one end off of potato or other produce. 

Place the cut end firmly against the CUTTING PLATE 

in front.

 

When produce is slightly cut by the 

blade, push the handle down firmly to complete 

the cut. Use a quick and firm motion to press items 

through the CUTTING PLATES. Be sure to move the 

arm all the way to the end to ensure a clean cut. 

TIP   : 

DO NOT load the item against the 

PUSH PLATE. 

Fresh is best. Be sure to use fresh fruits and vegetables in the cutter. 

NOTE: 

Mount horizontally on a sturdy surface by pressing down, to engage   

              SUCTION CUPS to surface.

PRE ASSEMBLY:

Take contents out of retail box and dispose of waste properly. Thoroughly 

wash parts with warm soapy water and dry completely. 

1

2

3

4

4

A

B

A

B

2

3

Reviews: