Char-Griller Patio Pro 1616, Owner'S Manual

Page: 12 / 72

1616_OM_C.2
5 B-5
Step 2
Attach LEG BRACES to the outside of one of the LONG and SHORT LEG and LEG CROSS BAR assemblies
from step 1. See below. Use two 1 1/2” hex bolts and nuts for each LEG BRACE but only finger tight.
Hex Nuts
Leg Braces
Hex Bolts
Step 3
Insert all four corners of the BOTTOM WIRE SHELF into the four holes located near the bottom inside
of the four LEGS. See below Next, rotate the LEGS upward until vertical. Important: Make sure the
two Long Legs are on the same end.
Bottom Wire Shelf