background image

For Safe Use of Your Grill and to Avoid Serious 

Injury:

Do not let children operate or play near grill. 

Keep grill area clear and free from materials that burn.

Do not block holes in sides or back of grill. 

Check burner flames regularly.

Use grill only in well-ventilated space. NEVER use in 

enclosed space such as carport, garage, porch, 

covered patio, or under an overhead structure of any 

kind.

Do not use charcoal or ceramic briquets in a gas grill. 

(

Unless briquets are supplied with your grill.)

• Use grill at least 3 ft. from any wall or surface. 

Maintain 10 ft. clearance to objects that can catch fire 

or sources of ignition such as pilot lights on water 

heaters, live electrical appliances, etc..

• Apartment Dwellers:

Check with management to learn the requirements 

and fire codes for using an LP gas grill in your 

apartment complex. If allowed, use outside on the 

ground floor with a three (3) foot clearance from walls 

or rails. Do not use on or under balconies.

• NEVER attempt to light burner with lid closed. A 

buildup of non-ignited gas inside a closed grill is 

hazardous.

• Never operate grill with LP cylinder out of correct 

position specified in assembly instructions. 

• Always close LP cylinder valve and remove 

coupling nut before moving LP cylinder from 

specified operation position.

WARNING

Safety Tips

s

Before opening LP cylinder valve, check the coupling nut for 

tightness.

s

When grill is not in use, turn off all control knobs and LP

cylinder valve.

s

If the outdoor cooking gas appliance is not in use, the gas 

must be turned off at the supply cylinder. Storage of an 

outdoor cooking gas appliance indoors is permissible only if 

the cylinder is disconnected and removed from the appliance.

s

Never move grill while in operation or still hot.

s

Use long-handled barbecue utensils and oven mitts to avoid 

burns and splatters.

s

Maximum load for side shelves is 10 lbs.

s

The grease cup 

must

be inserted into grease clip and 

emptied after each use. Do not remove grease cup until grill 

has completely cooled.

s

Clean grill often, preferably after each cookout.

s

If you notice grease or other hot material dripping from grill 

onto valve, hose or regulator, turn off gas supply at once. 

Determine the cause, correct it, then clean and inspect valve, 

hose and regulator before continuing. Perform a leak test.

s

The regulator may make a humming or whistling noise during 

operation. This will not affect safety or use of grill.

s

Only use the pressure regulator and hose assembly supplied 

with this grill. Replacement pressure regulator and hose 

assemblies must be specified or supplied by Char-Broil, LLC.

s

If you have a grill problem see the 

"Troubleshooting Section"

.

s

If the regulator frosts, turn off grill and LP cylinder valve 

immediately. This indicates a problem with the cylinder and it 

should not be used on any product. Return to supplier!

CAUTION

• Putting out grease fires by closing the lid is not 

possible. Grills are well ventilated for safety 

reasons.

• Do not use water on a grease fire. Personal injury 

may result. If a grease fire develops, turn knobs 

and LP cylinder off. 

• Do not leave grill unattended while preheating or 

burning off food residue on HI. If grill has not been 

regularly cleaned, a grease fire can occur that may 

damage the product. 

473721007  •  7

Summary of Contents for TRADITIONS 473721007





























Reviews: