6
DADO Button/Light
The DADO light will inform you of the connection and functional
status of your smoker:
Here’s what the DADO button does:
OFF
Not connected to the
Internet.
ON/SOLID
Connected to the
Internet.
ON/BLINKING
(ONCE PER SECOND)
Either needs to be paired to the
home Wi-Fi network or (if that has
already happened) you need to
push the DADO button to try and
reconnect.
ON/BLINKING
(TWICE PER SECOND “RAPID”)
This should only happen when you
have initiated a firmware update
from the app. In this case the DADO
button needs to be pushed.
READY/ON
Once the appliance is online and
ready to accept a profile, the light
should be
solid green
.
This lets the user know the
appliance is on and ready.
READY/ON
Either after warming expires (15
min) or if the user removes food
from the bin the light should go
back to
solid green
.
COOKING
As a food starts cooking, the first
quadrant begins to
flash orange
.
This should continue through each
quadrant as the cook progresses. 1
flash then solid, 2 flash then
solid...
User can see that their food is
cooking and how far it is in the
process from a glance.
START COOKING
After a profile has been added to
the appliance the green light
should start
flashing
.
This should catch the user’s eye,
letting them know that something
needs to be done.
COOK IS DONE/WARMING
When cook is complete it should
change to a
flashing orange
ring.
This will again, grab the users
attention that an action needs to
be done.
CLEANING
Orange flashing
propeller.
Light up quadrants 2 & 4
(1 & 3 off), then quadrants 1 & 3 (2 & 4 off), repeat.
RUNNING CHIP BURN
Orange chasing
.
Light up quadrant 1 (2-4 off),
then quadrant 2 (1, 3-4 off) and so on.
ERROR
Red flashing
.
CLEANING
ORANGE FLASHING propeller.
Light up quadrants 2 & 4 (1 & 3 off),
then quadrants 1 & 3 (2 & 4 off),
repeat.
RUNNING CHIP BURN
ORANGE CHASING. Light up
quadrant 1 (2-4 off), then quadrant
2 (1, 3-4 off) and so on.
READY/ON
Once the appliance is online and
ready to accept a profile, the light
should be
solid green
.
This lets the user know the
appliance is on and ready.
READY/ON
Either after warming expires (15
min) or if the user removes food
from the bin the light should go
back to
solid green
.
COOKING
As a food starts cooking, the first
quadrant begins to
flash orange
.
This should continue through each
quadrant as the cook progresses. 1
flash then solid, 2 flash then
solid...
User can see that their food is
cooking and how far it is in the
process from a glance.
START COOKING
After a profile has been added to
the appliance the green light
should start
flashing
.
This should catch the user’s eye,
letting them know that something
needs to be done.
COOK IS DONE/WARMING
When cook is complete it should
change to a
flashing orange
ring.
This will again, grab the users
attention that an action needs to
be done.
CLEANING
Orange flashing
propeller.
Light up quadrants 2 & 4
(1 & 3 off), then quadrants 1 & 3 (2 & 4 off), repeat.
RUNNING CHIP BURN
Orange chasing
.
Light up quadrant 1 (2-4 off),
then quadrant 2 (1, 3-4 off) and so on.
ERROR
Red flashing
.
15.124440 SnapSmoker GG ENG 15102042.indd 6
7/20/15 11:36 AM
