A
2
15
#8-32x3/8” screw
Left shelf
Sideburner lid
Place sideburner lid onto left shelf and align hinge holes in back of lid with shelf holes. Secure lid to the shelf using four
Remove the two screws and lock washers factory attached to the sideburner valve bracket.
Position sideburner
#8-32x3/8”
screws,
valve bracket beneath sideburnder shelf fascia so that valve stem
4mm
flat washers,
4mm
lock washers, and
#8-32
hex nuts, shown
A
.
#8-32 hex nut
Lid hinge
4mm lock
washer
4mm flat
washer
comes through larger center hole in fascia.
Align the holes on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were
Place knob bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia.
Attach using two
#8-32x3/8”
screws and
4mm
lock washers. Press sideburner control knob onto valve stem,
removed from bracket, shown
B
.
shown
C.
Screw
Sideburner shelf
Lock washer
Valve bracket
Valve stem
(removed from
valve bracket)
(removed from
valve bracket)
fascia
B
#8-32x3/8”
4mm lock washer
screw
Valve stem
Knob bezel
Control knob
C
