4
4754960
Before Beginning Assembly
Remove all contents from box. Lay cardboard on the ground when unpacking, assemble grill parts on the cardboard to avoid
scratching surfaces.
Carefully read and follow all assembly instructions, paying particular attention to parts orientation.
Easily find fasteners by referring to each item (shown actual size) at the start of each step.
Minimum tools...for assembly of your grill include screwdrivers (Phillips), adjustable
wrench and pliers. A 3/8" nut driver would be ideal.
You may fill your LP gas tank prior to assembly. The tank must also have the safety cap installed onto the tank valve when
not in use, see Use & Care section.
1
#10 Bag
094
208
302
Ignitor
Handle
302
208 between Leg and Grill Bottom (Finger
tighten fully onto screws)
094
(Inside Grill Bottom)
Note: Tighten by
turning screws only.
s
Use top two holes of
four-hole pattern.
Grill Bottom
Control Leg
s
Be sure that holes in grill bottom for electrode
are pointing upward toward control leg.
To
Grill
Bottom
