Char-Broil Patio Bistro, Assembly Manual

Page: 6 / 12

6
ASSEMBLY GUIDE
Part Qty
.
GRILL CART Assembly
A7 – Cart Bracket
1
Step 3 - Spread the leg assemblies apart just far enough to allow the insertion of the Wire Shelf (A8) into
the 4 leg holes. Assemble the Cart Bracket (A7) to the Cart Assembly by inserting 4 each 1/4-20x2"
screws int0 into corresponding holes as shown. Secure with 4 each, 1/4-20 nuts using a small adjustable
wrench, not supplied. FINGER TIGHTEN ONLY AT THIS POINT. The bracket will be tightened in step
B2. Be sure to install Cart Bracket (A7) on the side shown.
Place the Grill Bottom on the carton pad upside
down in preparation for the next step.
A8
1
Wire Shelf
–
Fasteners
1/4-20x2"
1/4-20 Nut
(qty 4)
screw
1/4-20 Nut
(qty 4)
A7
A8
A8
A7
1/4-20x2"
(qty 4)
screw
1/4-20
Nut
(qty 4)