7
ASSEMBLY GUIDE
GRILL FINAL Assembly
Part
Qty
.
C1
– Heat Tent
1
C2
– Cooking Grate 1
C3
– Warming Rack 1
C4
– Control Knob
1
C5
– Grease tray
1
C1
C3
C4
C5
Step 1
- With the
Grill Lid
open, place the legs of the
Heat Tent (C1)
into the matching impressions in the
Lower Body.
Next,
Place the
Cooking Grate
(C2)
into the
Lower Body.
The cooking grate ridges should run from front to back of the grill as shown
below. Be sure that the cooking grate rests squarely on the three brackets spaced around the
Lower Body.
Step 2
- Place the
Warming Rack (C3)
into position by first hooking the center pins into the windshield, then rotate the
warming rack down into position. Next, Press the
Control Knob (C4)
onto the valve stem.
Install the
Grease Tray (C5)
by sliding the tray onto the
Grease Tray Rails
from the rear of the grill.
Note:
The grease tray
rests between the grease tray rail stops. See detail shown in
Figure A
.
NOTE:
The
Cooking Grate
may have sharp edges. Be
very careful when handling the
Cooking Grate.
You
should wear gloves when handling the
Cooking Grate
.
The cooking grate ridges should run from front to back of
the grill as shown below. Be sure that the cooking grate
rests squarely on the brackets spaced around the lower
body. This will make for easier grate cleaning as well.
Grease
Tray
Rails
Visit
www.sizzleonthegrill.com/user-forums
to chat with Patio Bistro
®
owners just like you!
Grease
Tray
Rail Stops
Fig. A
C2
Ridges front to
back
Note:
The control
knob may be
factory assembled
