2
1
• Unpack all parts and check against parts list on page 2 to be sure you have everything necessary to assemble your grill.
• Assemble the four legs, one leg at a time, using four
1/4-20x1/2”
screws and four
1/4-20
nuts as shown Fig A, inserting the
screw through holes in Leg Connector, then through holes in legs. Tighten nuts hand-tight only!
• Place the Lower Body onto the Leg Assembly, Shown Fig. B. Insert two
1/4-20x1/2”
screws through each leg and then through
body. Attach nuts to screws from inside lower body.
DO NOT TIGHTEN until all screws are in place!
•
Once all screws and nuts have been installed, you may TIGHTEN ALL SCREWS.
• Attach three lower grid brackets to lower body, using one
1/4-20x1/2”
screw and one
1/4-20
nut for each bracket as shown,
inserting screw through hole in body then through bracket from inside body and attaching nut to screw. Make sure grid
brackets are aligned properly before fully tightening.
Screws
Lower
Grid Bracket
Lower Grid Bracket
aligned to lower body
Screw
Hex
Nut
Lower
Body
Assembly
Lower
Body
Leg
Assembly
Attach 8 Hex
Nuts to screws
from inside the Lower Body
Figure B
Screws
Hex
Nuts
Screws
Leg
Connector
Figure A
