12
11
Under sideburner shelf, attach sideburner ignitor wire to electrode
(A)
. Place burner cap onto sideburner. Attach sideburner
cap clip
(B)
. Place sideburner grate onto sideburner shelf, aligning grate legs with holes in shelf.
Burner cap
Sideburner grate
Sideburner Ignitor Wire
A
B
Sideburner
cap clip
First, attach tank heat shield and shield extension together with two
#8-32x3/8”
screws,
4mm
flat washers,
4mm
lock
washers and
#8-32
hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels.
Attach left and center front shield tabs under front brace with
#8x3/8”
self-tapping screws. Insert left and right grease tray
rails into slots beneath grease tray opening in upper back panel. Attach left rail to brace, with a
#8x3/8”
self-tapping screw.
Attach right rail and right front shield extension tab together under front brace with a
#8x3/8”
self-tapping screw.
Some components not shown for
illustration purposes.
Tank heat shield
Tank heat shield extension
Grease tray opening
#8-32x3/8”
Screw
#8-32 Hex nut
4mm Lock washer
4mm Flat washer
Left grease tray rail
Right grease tray rail
#8x3/8” self-
tapping screw
Front brace
Rear of shield - two tabs.
20 • 463268008
