#10-24x ½” Screw
11
Control Knob
Firebox
Burner Assembly
18 • 473720108
A
Burner, Firebox and Control Knobs
‘
Place burner assembly into firebox. Fasten the burner assembly to the firebox using
5mm fiber washers
and
#10-24 x ½”
machine screws.
Insert two
#10-24x1-1/4” Screws
from outer firebox, then fasten with two
#10-24 flange nuts
and
5mm fiber
washers
from inner.
Repeat on the other side
(A)
.
‘
Place firebox onto upper firebox supports. Make sure burner tubes are correctly engaged. If burner is not leveled from left to right,
adjust the two screws attaching valve to control panel. Attach ignitor wire to ignitor
(B)
.
‘
Attach firebox with
#10-24x1/2" screws, 5mm fiber washers
and
#10-24 flange nuts ( C).
‘
Push control knobs onto valve stems
( C)
.
#10-24
Flange Nut
Qty. 8
5mm Fiber Washer
Qty. 10
#10-24x1/2"
Screw
Qty. 6
B
Valve
Venturi tube
Ignitor wire
#10-24x ½” Screw
5
mm
Fiber Washer
#10-24 Flange Nut
Heat shield
for Tank
Make sure the Venturi tube are located
underneath Heat Shield
5
mm
Fiber Washer
#10-24x 1-1/4”
Screw
5
mm
Fiber Washer
#10-24
Flange Nut
C
#10-24x1/1/4”
Screw
Qty. 4
