Locking caster
Bottom shelf
Fixed caster
Rear
Front
ASSEMBLY
2
1
17
2
1/4-20x1/2” screw
Attach side panels to bottom shelf using three
1/4-20x1/2”
screws,
7mm
lock washers, and
7mm
flat washers per panel.
IMPORTANT: Panel with large hole must
Be on left side of bottom shelf.
7mm lock washer
7mm flat washer
Left side panel
(with large hole)
Right side panel
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Rear
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
A
Caster pin
Summary of Contents for 466420911
Page 30: ...NOTES 30...
Page 31: ...31 Warranty Registration Department P O Box 1240 Columbus GA 31902 1240...
Page 32: ......
