24
Tank Retainer
15
16
Set bottom of tank into notches of tank bracket
(A).
Tank collar opening must face to front of grill, lean tank inward and
engage tank collar with tank wire
(B).
CAUTION
• Cylinder valve must face to front of cart once tank is
attached. Failure to install cylinder correctly may
allow gas hose to be damaged in operation, resulting
in the risk of fire.
Insert tank retainer wire into left legs. Rotate tank retainer wire
inward
toward cart.
LP CYLINDER IS SOLD SEPARATELY.
Fill and leak check the cylinder before attaching to grill regulator (see Use &
Care section). Once cylinder has been filled and leak checked, place cylinder into notches in tank support bracket.
Make
sure cylinder valve is facing front of grill. See Use & Care section of this manual to perform the “Burner
Flame Check” and for important instructions before using.
Correctly Installed LP cylinder.
Tank Collar
Curved portion of tank wire
Always keep LP cylinders in
upright position during use,
transport and storage.
Regulator