20
21
•
Unscrew electronic ignitor cap on cart right side panel. Insert AA battery into ignitor, negative (-) end first.
•
Replace the cap.
CAUTION
Failure to install tank correctly may
allow gas hose to be damaged in
operation, resulting in the risk of fire.
LP Tank
LP Cylinder
(not included)
Always keep LP cylinders in
upright position during use,
transport, and storage.
Regulator
Cylinder screw at rear of cart
Tank Retainer Screw
28
•
LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank. Fill and leak-check before attaching
to grill and regulator.
See Use and Care section to correctly Leak Test and perform the Burner Flame Check.
•
Place Lp tank into hole in bottom shelf with tank collar opening facing to side as shown. Finger tighten tank retainer screw to hold
LP tank securely in place. Insert regulator through the large hole on left side panel.
AA Battery
+
Electronic Ignition Cap
-
