3
4
This step requires two people
to lift and position grill head
onto cart.
Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
14
Regulator hose
Grill head
On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one 1/4-20x1½” screw, 7mm lock washer, and 7mm flat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Upper back panel
Meijer.com
Summary of Contents for 463270512
Page 28: ...Meijer com...
