3
4
1
6
Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using two
Attach light adapter to back panel using four #8-32x3/8” screws, 4mm lock washers, 4mm flat washers and #8 nuts,
1/4-20x1/2” screws and 7mm lock washers each side. Secure lower back panel to bottom shelf using one 1/4-20x1/2”
screw and 7mm lock washer, shown B.
shown A.
A
4mm flat
#8 Nut
Adapter
#8-32x3/8”
4mm lock
screw
washer
washer
B
Lower back panel
1/4-20x1/2”
screw
1/4-20x1/2”
screw
lock washer
7mm
lock washer
7mm
Adapter
Insert temperature gauge stem into the biger hole above knob, shown A.
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, as
shown in B/C.
Temperature gauge
Temperature gauge stem
Control panel
C
B
Back of the panel
A
Summary of Contents for 463269211
Page 30: ...NOTES 30 ...
Page 31: ...Warranty Registration Department P O Box 1240 Columbus GA 31902 1240 31 ...
Page 32: ......
