463261508 • 19
attach tank heat shield and shield extension together with
(2)
#8-32x3/8”
screws,
4mm
flat washers,
4mm
lock washers and
#8-32
hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels. Attach left and
center front shield tabs under front brace with
(2)
self-tapping screws. Insert left and right grease tray rails into slots
beneath grease tray opening in upper back panel.Attach left rail to brace, with
(1)
#8x3/8”
self-tapping screw. Attach right rail
and right front shield extension tab together under front brace with
(1)
#8x3/8”
self-tapping screw.
#8x3/8”
12
11
Under sideburner shelf, attach sideburner ignitor wire to electrode
(A)
.
Place burner cap onto sideburner
(B)
.
Attach sideburner cap clip
( C )
.
Place sideburner cooking grate onto sideburner shelf, aligning grate legs with holes in shelf
(B)
.
Sideburner Ignitor Wire
A
C
Sideburner
cap clip
Some components not
shown for illustration
purposes.
Rear of shield - two tab
s.
Front of shield - three
tabs.
Tank heat shield
Tank heat shield extension
Grease tray opening
Left grease tray rail
Right grease tray rail
Front brace
4mm Lock Washer
Qty. 2
4mm Flat Washer
Qty. 2
#8x3/8"
Self-Tap Screw
Qty. 4
#8-32 Hex Nut
Qty. 2
#8x3/8"
Stainless Screw
Qty. 2
Burner cap
Sideburner cooking grate
B
